Vacuum pipe, brake servo LHD (B207)
Vacuum pipe, brake servo LHD (B207) |
To remove |
|
1. |
Pump the brake pedal until the vacuum is removed from the brake servo.
|
2. |
Remove the pipe from the T-nipple on the vacuum pipe.
|
3. |
Aut
: Remove the gear cable clips from the pipe.
|
4. |
Remove the pipe from the brake servo.
|
To fit |
1. |
Fit the pipe to the brake servo.
|
2. |
Fit the pipe to the T-nipple on the vacuum pump.
|
3. |
Aut
: Fit the gear cable clips.
|
4. |
Connect an exhaust extractor.
|
5. |
Start the engine and check the operation of the brake servo.
|