Vacuum pipe to vacuum pump, B284
Vacuum pipe to vacuum pump, B284 |
To remove |
1. |
Raise the car.
|
2. |
Remove the front bolts of the right wheel arch liner.
|
3. |
Fold down the hatch on the right spoiler shield.
|
4. |
Detach the vacuum hose from the vacuum pump.
|
5. |
Lower the car.
|
6. |
Remove the bolts and the air filter cover.
|
7. |
Remove the air filter and the lower part of the air filter.
|
8. |
Detach the electrical connection of the vacuum valve.
|
9. |
Detach the vacuum pipe at the joint on the bulkhead.
|
10. |
Remove the vacuum pipe.
|
To fit |
1. |
Position the vacuum pipe at the air filter's intake manifold.
|
2. |
Fit the rubber grommet in the plate groove.
|
3. |
Attach the electrical connection of the vacuum valve.
|
4. |
Attach the vacuum pipe at the joint on the bulkhead.
|
5. |
Fit the lower part of the air filter housing.
|
6. |
Fit the air filter and its cover. Tighten the hose clamp and the bolts.
|
7. |
Raise the car.
|
8. |
Fit the vacuum hose to the vacuum pump.
|
9. |
Fit the front bolts of the right wheel arch liner.
|
10. |
Lower the car.
|
11. |
Check the functionality of the vacuum pump.
|