Protective corner moulding, bumper shell, 5D

/ 9-3 (9440) / 2006 / 8. Body / Body / Auxiliaries / Adjustment/replacement / Protective corner moulding, bumper shell, 5D

To remove

1.	Use 82 93 474 Removal tool .

2.	Remove the protective corner mouldings by carefully sticking the tool under the corner of the moulding. Pull out the clips from the bumper shell.

To fit

1.	Fit the protective moulding. Press the moulding so the clips fasten.

2.	Make sure all the clips are fastened to the bumper shell.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.