Rear spoiler (Aero)
| Rear spoiler (Aero) | 
| To remove | 
| 1. | 
        Open the boot lid.
         | 
      |
| 2. | 
        Remove the grab handle.
         
        
         | 
      |
| 3. | 
        Remove the clips securing the trim.
         | 
      |
| 4. | 
        US/CA: Remove the emergency opening handle from the trim. Detach the cable from the handle.
         | 
      |
| 5. | 
        Bend aside the trim slightly from the cover on the lock. Pull out the rear trim clips. Remove the trim from the boot lid.
         | 
      |
| 6. | 
        Remove the spoiler bolts.
         
        
         | 
      |
| 7. | 
        Remove the spoiler from the boot lid.
         | 
      |
| To fit | 
| 1. | 
        Clean the surface of the boot lid.
         | 
      |
| 2. | 
        Remove the tape protector from the spoiler.
         | 
      |
| 3. | 
        Guide the spoiler into position.
         | 
      |
| 4. | 
        Fit the bolts securing the spoiler.
         
        
         | 
      |
| 5. | 
        Lift up the trim.
         US/CA: Pass the emergency opening handle through the trim.  | 
      |
| 6. | 
        Guide the trim into position relative to the lock cover.
         | 
      |
| 7. | 
        Guide in the trim's locating clips and press the rear clips home.
         
        
         | 
      |
| 8. | 
        Fit the clips.
         | 
      |
| 9. | 
        Fit the grab handle.
         | 
      |
| 10. | 
        US/CA: Attach the emergency opening handle to the cable. Fit the handle to the trim. Check the function of the emergency opening handle.
         | 
      |
| 11. | 
        Close the boot lid.
         | 
      |
