Adjustment of position sensor, first bow locked (561c)
|
|
Adjustment of position sensor, first bow locked (561c)
|
|
Adjustment and checking of position sensor, first bow locked
|
|
1.
|
Open the boot lid and take out the emergency operation tool.
|
|
2.
|
Open the soft top and leave the soft top cover open.
|
|
3.
|
Remove the cover plate clip.
|
|
4.
|
Remove the cover plate.
|
|
5.
|
Remove the front cover by pulling it backwards.
|
|
6.
|
Lock the lock hooks by using the emergency opening tool. The lock hooks must be in fully locked position.
|
|
7.
|
Check the measurement between the sensor and the drive control using a feeler gauge. The measurement must be 0.7 mm. Adjust if necessary as follows:
|
|
|
7.A.
|
Unscrew the sensor's screw.
|
|
|
7.B.
|
Use a feeler gauge to set the correct measurement between the sensor and the drive control. The measurement must be 0.7 mm.
|
|
8.
|
Fit the front cover.
|
|
10.
|
Fit the cover plate clip.
|
