Adjustment, soft top cover
|
Adjustment, soft top cover
|
Adjustment, upward, downward (backward, forward is also possible)
|
If the soft top cover is too high or low, proceed as follows:
1.
|
Open the soft top completely.
|
2.
|
Measure how much the soft top cover deviates from its correct position.
|
3.
|
Open the soft top cover.
|
4.
|
Mark the position for the guide pin attachment.
|
5.
|
There is a graduation to facilitate adjustment. Loosen the hinge bolts and guide pin screws until the hinge can be adjusted.
|
6.
|
Adjust the soft top cover hinge to the desired position and fit the bolts.
|
7.
|
Close the soft top cover and check the adjustment.
|
8.
|
Operate the soft top to check the function of the soft top cover.
|
Adjustment, lateral, backward, forward
|
1.
|
Open the soft top and leave the soft top cover open.
|
2.
|
Loosen the soft top cover bolts and the screws for the guide pin attachment until the soft top cover can be adjusted with the hinge. The rearmost bolt has a graduation to facilitate adjustment.
|
3.
|
Close the soft top cover slowly and carefully.
|
4.
|
Align the soft top cover by adjusting it until the gap is the same all round.
|
5.
|
Open the soft top cover.
|
6.
|
Tighten the soft top cover bolts and the screws for the guide pin attachment.
|
7.
|
Close the soft top cover and check the adjustment.
|