Hydraulic unit
Hydraulic unit |
Removing |
1. |
Close the soft top completely.
|
2. |
Remove the
Luggage compartment side trim, CV
on the right-hand side.
|
3. |
Remove the hydraulic unit nuts and lift out the hydraulic unit somewhat to access the connections.
|
4. |
Unplug the connector to the pump.
|
5. |
Unplug the connectors to the valves.
|
6. |
Remove the oil filler plug (for pressure equalisation). Refit the plug.
|
7. |
Place some paper under the hydraulic unit to catch any hydraulic fluid that may run out.
|
8. |
Remove the hydraulic hose attaching plate.
|
9. |
Lift out the hydraulic unit.
|
Fitting |
1. |
Place the hydraulic unit in the luggage compartment.
|
2. |
Place the attaching plate together with the hydraulic lines in mounting position.
|
3. |
Fit and tighten the bolts for the hydraulic line attaching plate.
|
4. |
Plug in the pump motor connector.
|
5. |
Connect the hydraulic valve connectors.
|
6. |
Place the hydraulic unit in mounting position. Fit the hydraulic unit nuts.
|
7. |
Fill the reservoir to MAX with fluid.
Use 89 96 860 Power steering fluid .
|
8. |
Open and close the soft top for 5 complete cycles to bleed the system and check its function.
|
9. |
Check for any fluid leaks.
|
10. |
Check the oil level and top up as necessary. See
Checking/filling oil
. Use
89 96 860 Power steering fluid
.
|
11. |
Connect the diagnostics tool and erase any diagnostic trouble code.
|
12. |
Fit
Luggage compartment side trim
.
|