Heating pad in seat, CV
Heating pad in seat, CV |
To remove |
1. |
Remove the seat.
|
2. |
Remove the backrest cover.
|
3. |
Electric seat:
Remove the rear outer side cover.
Manual seat: Remove the rear outer side cover. |
4. |
Remove the rear inner side cover.
|
5. |
Remove the rear lower side cover.
|
6. |
Remove the side tensioners for the seat upholstery.
|
7. |
Remove the elastic strips from the seat springs.
|
8. |
Remove the trim strips.
|
9. |
Unplug the connector for the heating pad and passenger detector.
|
10. |
Fold back the backrest.
|
11. |
Remove the upholstery strips and remove the seat upholstery and foam cushion.
|
12. |
Remove the staples and upholstery from the cushioning.
|
13. |
Carefully pull the heating pad off the upholstery.
|
To fit |
|
2. |
Remove the protective backing from the self-adhesive areas along the sides of the heating pad.
Carefully position the heating pad and press the self-adhesive area against the foam cushion. Make sure that there are no folds. |
3. |
Remove the protective backing from the self-adhesive areas at the front of the heating pad.
Carefully position the heating pad and press the self-adhesive area against the foam cushion. Make sure that there are no folds. |
4. |
Fit the relay into the recess in the foam cushion.
|
5. |
Fit the upholstery to the cushioning with staples.
|
6. |
Position the foam cushion and upholstery on the seat frame.
|
7. |
Connect the connector.
|
8. |
Fit the upholstery strips to the front edge and sides of the seat upholstery.
|
9. |
Fold down the backrest.
|
10. |
Plug in the connector for the heating pad and passenger detector.
|
11. |
Fit the trim strips.
|
12. |
Fit the elastic strips to the seat springs.
|
13. |
Fit the side tensioners to the seat.
|
14. |
Fit the lower rear cover.
|
15. |
Fit the rear inner side cover
|
16. |
Electric seat:
Fit the rear outer seat cover.
Manual seat: Fit the outer side cover. |
17. |
Fit the backrest cover.
|
18. |
Fit the seat.
|