Replacing wires for lowering the passenger seat backrest
Replacing wires for lowering the passenger seat backrest |
To remove |
1. |
Lower the backrest.
|
2. |
Remove the catch. Use a screwdriver to release the hook.
|
3. |
Remove the grommet for the lowering mechanism.
|
4. |
Release the upholstery strip along the edges of the back of the backrest frame.
|
5. |
Fold up the rear side of the backrest.
|
6. |
Release the lower mechanism's spring on each side.
|
7. |
Remove the wire on both sides.
|
8. |
Remove the spring for the wire.
|
9. |
Remove the wire from its upper mounting.
|
10. |
Remove the plastic sleeve of the grommet.
|
11. |
Remove the wire from the arm.
|
12. |
Remove the cable tie.
|
13. |
Lift away the wire.
|
To fit |
1. |
Fit a new wire by threading it onto the opening arm.
|
2. |
Place the wire in the groove on the opening arm.
|
3. |
Fit the wire in its mounting.
|
4. |
Fit the spring.
|
5. |
Hook the wire in the lower opening mechanisms on each side of the seat and fit the springs.
|
6. |
Fit the grommet sleeve.
|
7. |
Fit the grommet.
|
8. |
Fit the catch.
|
9. |
Fit the cable tie.
|
10. |
Fit the trim.
|