ACM Ch.-61034049 / B0103 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Airbag warning lamp is lit

B0103 00

Fault symptom

Airbag warning lamp is lit

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Fault criteria:

Sensor uses more than 90 mA for more than 20 ms.

System reaction to a fault:

•	The airbag system should be considered non-operational. There may, however, be some functionality.

•	The control module ignores the activation command from the sensor as long as a fault is active.

Checking the wiring harness

Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

IMPORTANT

Read "Before starting fault diagnosis" under Fault diagnosis, general before beginning fault diagnosis.