ACM Ch.61034050- / B3856 0F
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Airbag warning lamp is lit
Control Module not Added
Fault symptom
Airbag warning lamp is lit
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
System reaction to a fault:
| • | The airbag system should be considered non-operational. There may, however, be some functionality. |
| • | The control module ignores the activation command from the sensor as long as a fault is active. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
IMPORTANT
| • | See "Before changing a control module". |
Diagnostic help
Diagnosis regards:
