AHL / B1001 46
Symptom: Message appears in display.
Headlamp beam adjustment not working.
Control Module not Added
Fault symptom
Message appears in display.
Headlamp beam adjustment not working.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Diagnostics run when ignition is ON. |
Fault criteria:
No vehicle type programmed. |
System reaction to a fault:
Headlamp beam adjustment is switched off. |
Headlamp reflectors adjusted to a lower position. |
Diagnostic help
IMPORTANT
• | See "Safety and handling directions, xenon headlamps". |
• | Refer to document, "Calibration of AHL control modules". |
• | See "After fitting a control module" under fault diagnosis, general. |
Diagnostic help
Functions in the diagnostic tool related to the fault: