SAAB WIS ONLINE

AMP1 / B3899 48

Read the instructions below then start the fault diagnostic procedure.

Symptom: Control module not configured.

  B3899 48


Control Module not Added

Fault symptom

Control module not configured.

On-board diagnosis

Enable criteria:

Ignition ON.
Starter motor cranking or engine running.

Fault criteria:

Control module not configured.

System reaction to a fault:

Non-immobilizer related functions should have full functionality.

Diagnostic help

Control module was not added.

See "Procedure after fitting the control module"

Diagnostic help

Functions in the diagnostic tool related to the fault:

See menu "All - Add/Remove"