AMP1 / B3902 70
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Audio system not functioning.
AMP 1 or ICM Not Added
Fault symptom
Message appears in display.
Audio system not functioning.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
AMP1 not joined with ICM. |
System reaction to a fault:
The immobilizer-related functions are switched off. |
Diagnostic help
Control module was not added.
See "Procedure after fitting the control module"
Diagnostic help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |