AMP2 / B1001 41
Symptom: Control module not configured.
| B1001 41 |
Control Module not Added
Fault symptom
Control module not configured.On-board diagnosis
Type of diagnosis:
| Continuous |
Enable criteria:
| O-bus active. |
Fault criteria:
| Control module not configured. |
Diagnostic help
Control module was not added.See "Procedure after fitting the control module"
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
