BCM / B1000 37
Read the instructions below then
start the fault diagnostic procedure.
Control Module. Internal Fault
On-board diagnosis
Type of diagnosis:
Enable criteria:
Diagnostics run when ignition is ON. |
Fault criteria:
Control module on-board diagnostics has detected a "Timeout" fault. |
System reaction to a fault:
Diagnostic help
See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general.
Diagnostic help
Diagnosis regards:
To locate electrical faults in the control module internal electronics. |
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |