BCM / B3812 04
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
UAM Signal, Open Circuit
Fault symptom
Message appears in display.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Diagnosis runs when car alarmed or when ignition on. |
Fault criteria:
No signal from ultrasound sensor. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |
Functions in the diagnostic tool related to the fault:
(See also description of readings/activations in diagnostic tool) |