CIM / B1000 35
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Cannot turn key.
Engine does not start.
Steering column lock not working.
Control Module. Internal Fault
Fault symptom
Message appears in display.
Cannot turn key.
Engine does not start.
Steering column lock not working.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Diagnosis takes 65 minutes. If the control module enters into standby before diagnosis is complete, diagnosis is resumed the next time the control module wakes. |
Fault criteria:
Control module on-board diagnostics has detected a ROM error. |
System reaction to a fault:
The control module does not allow starter motor cranking. |
Steering column lock deactivated. |
Diagnostic help
See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general.
Diagnostic help
Diagnosis regards:
To locate electrical faults in the control module internal electronics. |
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |