CIM / B1000 37
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Cannot turn key.
Engine does not start.
Steering column lock not working.
Control Module. Internal Fault
Fault symptom
Message appears in display.
Cannot turn key.
Engine does not start.
Steering column lock not working.
On-board diagnosis
Type of diagnosis:
Diagnostics performed when control module goes to standby. |
Diagnostics run each time control module "wakes". |
Enable criteria:
Fault criteria:
Control module on-board diagnostics has detected an internal fault. |
System reaction to a fault:
The control module does not allow starter motor cranking. |
Steering column lock deactivated. |
Diagnostic help
See "Before changing a control module" and "After fitting a control module" under Fault diagnosis, general.
Diagnostic help
Diagnosis regards:
To locate electrical faults in the control module internal electronics. |
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |