CIM / B1000 38
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Engine does not start.
Steering column lock not working.
Control Module. Internal fault
Fault symptom
Message appears in display.
Engine does not start.
Steering column lock not working.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Diagnostics runs when key is inserted. |
Fault criteria:
Control module on-board diagnostics has detected a "Timeout" fault. |
System reaction to a fault:
Steering column lock deactivated. |
The control module does not allow starter motor cranking. |
Diagnostic help
The DTC is reported from the ISM and can be generated if communication between the CIM and ISM is faulty.
Diagnostic help
Diagnosis regards:
To locate electrical faults in the control module internal electronics. |