CIM / B1001 41
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Engine does not start.
Message appears in display.
Control Module not Added
Fault symptom
Engine does not start.
Message appears in display.
On-board diagnosis
Type of diagnosis:
| Diagnostics runs each time the control module is active and when programming has been carried out. |
Enable criteria:
| Diagnostics runs when key is inserted. |
Fault criteria:
System reaction to a fault:
| The control module does not allow starter motor cranking. |
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
