CIM / B1001 66
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Cruise control not working.
Control Module not Added
Fault symptom
Message appears in display.
Cruise control not working.
On-board diagnosis
Enable criteria:
Diagnostics runs when key is inserted. |
Fault criteria:
The control module receives signals from the cruise control button, but is not programmed for this. |
System reaction to a fault:
OK report:
Fault criteria NOT fulfilled. |
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |