CIM / B1001 67
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Control Module not Added
Fault symptom
Message appears in display.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Diagnostics runs when key is inserted. |
Fault criteria:
The vehicle is equipped with a wiper blade intended for use with a rain sensor, but is not programmed for this. |
System reaction to a fault:
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |