CIM / B1016 00
Read the instructions below then
start the fault diagnostic procedure.
Control Module Not Added
On-board diagnosis
Type of diagnosis:
| Diagnostics is carried out after "Reset" and after the VIN has been programmed. |
Enable criteria:
| Diagnostics runs when key is inserted. |
Fault criteria:
System reaction to a fault:
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Diagnosis regards:
| Checking if the VIN is programmed in the control module. |
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
