SAAB WIS ONLINE

CIM / B1440 0F

Read the instructions below then start the fault diagnostic procedure.

Symptom: Error message is shown on the display. Engine does not start. Steering column lock not working. Ignition cannot be switched off or key cannot be removed from ignition switch.

  B1440 0F


+15 Circuit from ISM, Open

Fault symptom

Error message is shown on the display.

Engine does not start.

Steering column lock not working.

Ignition cannot be switched off or key cannot be removed from ignition switch.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Fault criteria:

Open-circuit on power supply from ISM.
Signal from the key does not match key position.

System reaction to a fault:


The control module does not allow starter motor cranking.
Steering column lock deactivated.

Checking the wiring harness

Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:

Diagnostic trouble code can be generated with low battery voltage.
Electrical fault in connecting leads or component.

Functions in the diagnostic tool related to the fault:

Test value:
Ignition Key Position +B, Wire from ISM
Ignition Switch +B, K-Line from ISM
(See also description of readings/activations in diagnostic tool)