CIM / B1445 02
Read the instructions below then start the fault diagnostic procedure.
Symptom: Engine does not start. Steering column lock not working.
B1445 02 |
Fault symptom
Engine does not start.Steering column lock not working.
On-board diagnosis
Type of diagnosis:
Continuous |
Enable criteria:
Diagnostics run when key is inserted and removed. |
Fault criteria:
Steering column lock trigger lead, short circuit to ground. |
System reaction to a fault:
Steering column lock deactivated. |
The control module does not allow starter motor cranking. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |
Functions in the diagnostic tool related to the fault:
Test value: |
SCL Voltage, Unlocked and Secured |
(See also description of readings/activations in diagnostic tool) |