CIM / B3700 04
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Intermittent wiper operation interval control does not work.
Stalk Switch Wiper Interval Circuit, Open
Fault symptom
Intermittent wiper operation interval control does not work.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
Intermittent wiper lever, open circuit |
Diagnostic help
Diagnosis regards:
Electrical fault in the component. |
Functions in the diagnostic tool related to the fault:
Wiper Front. Interval Position 1 |
Wiper Front. Interval Position 2 |
Wiper Front. Interval Position 3 |
Wiper Front. Interval Position 4 |
Wiper Front. Interval Position 5 |
(See also description of readings/activations in diagnostic tool) |