SAAB WIS ONLINE

CIM / B3806 05

Read the instructions below then start the fault diagnostic procedure.

Symptom: Main beam flash not working.

  B3806 05


Stalk Switch Flash to Pass Circuit, Open/Short to B+

Fault symptom

Main beam flash not working.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.
The main beams should be on.

Fault criteria:

The control module detects that the main beam switch is closed but the main beam flash switch is open.

System reaction to a fault:

None

Diagnostic help

Diagnosis regards:

Electrical fault in connecting leads or component.

Functions in the diagnostic tool related to the fault:

Test value:
Stalk Switch Flash to Pass
(See also description of readings/activations in diagnostic tool)