SAAB WIS ONLINE

CIM / B3925 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Message appears in display. The engine may not start.

  B3925 00


BCM or CIM Not Added

Fault symptom

Message appears in display.

The engine may not start.

On-board diagnosis

Type of diagnosis:

Continuous
Diagnostics carried out according to valid fix code from the transponder.

Enable criteria:

Diagnostics runs when key is inserted.

Fault criteria:

Incorrect immobilizer code received from BCM.

Diagnostic help

See "After fitting a control module" under fault diagnosis, general.

Diagnostic help

Functions in the diagnostic tool related to the fault:

See menu "All - Add/Remove"