CIM / B3927 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Engine does not start.
PDM or CIM Not Added
Fault symptom
Engine does not start.
On-board diagnosis
Type of diagnosis:
Diagnostics carried out according to valid fix code from the transponder. |
Enable criteria:
Diagnostics runs when key is inserted. |
Fault criteria:
Incorrect immobilizer code received from PDM. |
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |