CIM / B3947 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Cannot turn key.
Error message is shown on the display.
CIM or SCL Not Added
Fault symptom
Cannot turn key.
Error message is shown on the display.
On-board diagnosis
Type of diagnosis:
Diagnostics carried out with each signal received from CIM to the steering column lock. |
Enable criteria:
Diagnostics runs when key is inserted. |
Fault criteria:
Incorrect response from CIM. |
System reaction to a fault:
Steering column lock not working. |
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |