CIM / B3948 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Possible that ignition key cannot be turned.
The engine may not start.
Information DTC: Steering Lock System, Critical Failure
Fault symptom
Message appears in display.
Possible that ignition key cannot be turned.
The engine may not start.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Diagnostics run when key is inserted and removed. |
The following diagnostic trouble codes may not be generated: |
System reaction to a fault:
The control module does not allow starter motor cranking. |
Diagnostic help
The DTC is an information fault code generated because another SCL trouble code is set.