CIM / B3948 0F
Read the instructions below then
start the fault diagnostic procedure.
Symptom: The engine may not start.
Possible message on the display
Information DTC: Steering Lock System, Non Safety Critical Failure
Fault symptom
The engine may not start.
Possible message on the display
On-board diagnosis
Type of diagnosis:
Enable criteria:
Diagnostics run when key is inserted and removed. |
The following diagnostic trouble codes may not be generated: |
Fault criteria:
The expected position of the lock bolt does not match the actual position of the lock bolt. |
Diagnostic help
Diagnosis regards:
The DTC can be generated if SCL is in failsafe position (lock bolt position was moved). |