SAAB WIS ONLINE

CIM / B3981 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Message appears in display. Engine may not start.

  B3981 00


PDM Missing on Bus or Not Added

Fault symptom

Message appears in display.

Engine may not start.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Diagnostics runs when key is inserted.

Fault criteria:

Immobilizer code from PDM absent.

Diagnostic help

Diagnosis regards:

The fault code may be set if the +30 supply to the PDM has been broken and restored when the ignition key was in the ignition lock.
See "After fitting a control module" under fault diagnosis, general.

Functions in the diagnostic tool related to the fault:

See menu "All - Add/Remove"