CU AMPS / B1016 00
Read the instructions below then start the fault diagnostic procedure.
Symptom: No function
B1016 00 |
Fault symptom
No functionOn-board diagnosis
Type of diagnosis:
For +30 reset and after programming. |
Enable criteria:
Ignition ON. |
Fault criteria:
Control module was not added. |
Diagnostic help
Control module was not added.See "Procedure after fitting the control module"
Check that the following MIs/Campaigns have been carried out before starting fault diagnosis:
US Market
MI No. 391-2394 - Customer Satisfaction Campaign 15421 - Update of OnStar system.
MI No. 391-2409 - Customer Satisfaction Campaign 15424 - Update of OnStar system.
CA Market
MI No. 391-2410 - Customer Satisfaction Campaign 15421 - Update of OnStar system.
MI No. 391-2408 - Customer Satisfaction Campaign 15424 - Update of OnStar system.
Diagnostic help
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |