DVD / B3900 48
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Message appears in display.
Car does not start.
Control Module not Added
Fault symptom
Message appears in display.
Car does not start.
On-board diagnosis
Type of diagnosis:
Enable criteria:
| Diagnostics run when ignition is ON. |
Fault criteria:
| Immobilizer Code not programmed |
System reaction to a fault:
| The immobilizer-related functions are switched off. |
Diagnostic help
See "After fitting a control module" under fault diagnosis, general.
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
