EDC16 / P0425 05
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Exhaust Gas Temperature Front Sensor Circuit, Open/Short to B+
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
On-board diagnosis
Enable criteria:
Fault criteria:
| Input voltage exceeds 2.23 V. |
| Condition above must be fulfilled for at least 0.48 s. |
System reaction to a fault:
| Control module uses 200°C as a substitute value. |
