SAAB WIS ONLINE

EDC16 / P0500 7F

Read the instructions below then start the fault diagnostic procedure.

  P0500 7F


TCS/ESP Missing on Bus



On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Fault criteria:

No or faulty vehicle speed signal from TCS/ESP for 0,26 s.

Checking the wiring harness

Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force.
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:

See fault diagnosis for the TCS/ESP DTC in question and bus fault diagnosis.
Electrical fault on bus leads or in the component.

Functions in the diagnostic tool related to the fault: