EDC16 / P0621 02
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Charging lamp malfunction.
Message appears in display.
Generator L Terminal, Control Circuit, Faulty Signal
Fault symptom
Charging lamp malfunction.
Message appears in display.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
Control module reports that the generator is charging when the engine is running. |
OK report:
Fault criteria NOT fulfilled. |
Checking the wiring harness
• | Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force. |
• | Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force. |
Diagnostic help
Control module reports that the generator is charging but the engine is not running.