EDC16 / P0651 02
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Idling speed set to 1400 rpm.
Performance loss.
Cruise control not working.
Voltage Supply Group 2. Short to Ground.
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Idling speed set to 1400 rpm.
Performance loss.
Cruise control not working.
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
| Control module output short-circuit to ground. |
System reaction to a fault:
| Cruise control switched off. |
| Idling speed set to 1400 rpm. |
Checking the wiring harness
| • | Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force. |
| • | Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force. |
Diagnostic help
Diagnosis regards:
| • | Fuel pressure sensor, fuel rail. |
| • | Accelerator pedal position sensor |
