SAAB WIS ONLINE

EDC16 / P1120 04

Read the instructions below then start the fault diagnostic procedure.

Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general) Performance loss.

  P1120 04


Pedal Position Sensors not Connected.

Fault symptom

Fault indicator lamp (for further information see WIS Fault diagnosis, general)

Performance loss.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Fault criteria:

Voltage on both sensor inputs is below 1.5 V for more than 0.3 s.

System reaction to a fault:

Limp Home, engine speed limitation.

Checking the wiring harness

Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force.
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:


Functions in the diagnostic tool related to the fault:

Test value:
Pedal Position Sensor 1
Pedal Position Sensor 2
(See also description of readings/activations in diagnostic tool)