SAAB WIS ONLINE

EDC16 / P1122 52

Read the instructions below then start the fault diagnostic procedure.

Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general) Engine speed cannot be regulated. Idling speed set to 1400 rpm.

  P1122 52


Pedal Position Sensor Circuit. Plausibility Fault Between Circuit 1 and 2.

Fault symptom

Fault indicator lamp (for further information see WIS Fault diagnosis, general)

Engine speed cannot be regulated.

Idling speed set to 1400 rpm.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Fault criteria:

Control unit detects a general plausibility fault in the pedal position sensor.

System reaction to a fault:

Limp Home, engine speed limitation.

Checking the wiring harness

Faults in the control module female connector can be the cause of the DTC. Check the connector with respect to oxidation, depressed pins and pin clamping force.
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:


Functions in the diagnostic tool related to the fault:

Test value:
Pedal Position Sensor 1
Pedal Position Sensor 2
(See also description of readings/activations in diagnostic tool)