SAAB WIS ONLINE

EDC16 / P1614 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Message appears in display. Car does not start.

  P1614 00


EDC16 or CIM Not Added

Fault symptom

Message appears in display.

Car does not start.

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Ignition ON.

Fault criteria:

Incorrect transponder response from CIM.

OK report:

Fault criteria NOT fulfilled.

Diagnostic help

Diagnosis regards:

See "After fitting a control module" under fault diagnosis, general.
Diagnostics is carried out once each time the ignition is switched on.

Functions in the diagnostic tool related to the fault:

See menu "All - Add/Remove"