EHU / B1263 04
Read the instructions below then start the fault diagnostic procedure.
| B1263 04 |
Self-test initiation.
On-board diagnosis
Enable criteria:
| Ignition ON. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.Diagnostic help
Diagnosis regards:
| Electrical fault in connecting leads or component. |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
