ICM / B1000 57
Read the instructions below then start the fault diagnostic procedure.
| B1000 57 |
Control Module. Internal Fault
On-board diagnosis
Type of diagnosis:
| Diagnostics runs each time a message is sent. |
Enable criteria:
| Ignition ON. |
Fault criteria:
| Control module has detected an internal fault. |
Diagnostic help
Change the control module.See "Procedure for control module replacement"
Diagnostic help
Functions in the diagnostic tool related to the fault:
| See menu "All - Add/Remove" |
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
