ME9 / P0303 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
(Check Engine lamp flashes if diagnostics has detected a misfire that is harmful to the catalytic converter).
Uneven running and misfiring.
Misfire Cyl 3
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
(Check Engine lamp flashes if diagnostics has detected a misfire that is harmful to the catalytic converter).
Uneven running and misfiring.
On-board diagnosis
Type of diagnosis:
Each misfire is registered and evaluated two different ways depending on the type of misfire. |
• | Harmful to the catalytic converter. |
Enable criteria:
General conditions for this DTC |
• | Positive engine torque (negative torque = engine braking). |
• | Fuel level at least 12%. |
• | Intake air temperature is above -30°C. |
• | P0318 must not be detected. |
• | Total number of combustion signals registered. |
• | Number of missing combustion signals is accumulated per cylinder. The total number of permissible misfires is specified in a load and speed-dependent matrix. |
Fault criteria:
• | Combusions affecting emissions detected for cylinder in question. |
Misfires that could damage the catalytic converter detected for the cylinder in question. |
Diagnostic help
Diagnosis regards:
Fuel/air mixture too rich or too lean, insufficient compression, poor spark plugs causing incomplete combustion. |
Functions in the diagnostic tool related to the fault:
• | Airmass Deviation from Calculated |
• | Fuel balancing Cylinders 1 - 6 |
(See also description of readings/activations in diagnostic tool) |