ME9 / P0328 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Malfunction Indicator Lamp
Knock Sensor Circuit Bank 1, High Voltage
Fault symptom
Malfunction Indicator Lamp
On-board diagnosis
Type of diagnosis:
Enable criteria:
Engine speed higher than 1520 rpm |
No fault on crankshaft position sensor. |
No fault on camshaft position sensors. |
Fault criteria:
Sensor signal is higher than that of a normal engine noise level for more than 2 seconds. |
OK report:
Fault criteria NOT fulfilled. |
Fault handling:
(See section Fault handling III, "Other emission-related components and functions" for more information.) |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
Electrical fault in connecting leads or component. |
Functions in the diagnostic tool related to the fault:
(See also description of readings/activations in diagnostic tool) |