ME9 / P0499 00

Read the instructions below then start the fault diagnostic procedure.

Symptom: Malfunction Indicator Lamp

P0499 00

Fault symptom

Malfunction Indicator Lamp

On-board diagnosis

Type of diagnosis:

Continuous

Enable criteria:

Battery voltage must be between 10 - 18 V.

Engine running.

Cut-off valve activated/deactivated once.

Fault criteria:

When output voltage is more than 4.6 V when the output is active.

Fault handling:

Type III

(See section Fault handling III, "Other emission-related components and functions" for more information.)

Checking the wiring harness

Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

Diagnostic help

Diagnosis regards:

Electrical fault in connecting leads or component.

Functions in the diagnostic tool related to the fault:

Test value:

•	Shut-off valve, EVAP canister.

Activation:

•	Shut-off valve, EVAP canister.

(See also description of readings/activations in diagnostic tool)