ME9 / P0610 00
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Fault indicator lamp (for further information see WIS Fault diagnosis, general)
Control Module not Added
Fault symptom
Fault indicator lamp (for further information see WIS Fault diagnosis, general)
On-board diagnosis
Type of diagnosis:
Enable criteria:
Fault criteria:
Control module not programmed for variant. |
Dependent:
System reaction to a fault:
OK report:
Fault criteria NOT fulfilled. |
Fault handling:
(See section Fault handling III, "Other emission-related components and functions" for more information.) |
Diagnostic help
Diagnosis regards:
See "After fitting a control module" under fault diagnosis, general. |
Add the control module using diagnostic tool. |
Functions in the diagnostic tool related to the fault:
See menu "All - Add/Remove" |