ME9 / P2096 00
Read the instructions below then
start the fault diagnostic procedure.
Post Catalyst Fuel Trim System, Low Limit Bank 1
On-board diagnosis
Type of diagnosis:
Enable criteria:
Closed loop lambda control active. |
Fault criteria:
When the fuel correction factor for O2S2 is adjusted by more than 3 % in lean mode in relation to the lambda value for more than 4 s. |
Checking the wiring harness
Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.
Diagnostic help
Diagnosis regards:
Worn-out sensor. Engine management system can no longer compensate for sensor operation. |
Functions in the diagnostic tool related to the fault:
• | Closed loop lambda control status |
(See also description of readings/activations in diagnostic tool) |